DRAGONLOCK™ Miniatures are hyper-detailed sculpts specifically designed to print on FDM 3D printers with NO SLICER SUPPORTS! Best of all, a standard mini costs UNDER TEN CENTS to print. Become your own miniature manufacturer today!
Suggested print settings (for best results print one miniture at a time):
.25mm Nozzle (Hatchbox PLA or eSUN PLA Pro recommended)
Temperature: 190˚
Layer height: .08mm (.05mm to .1mm will work as well)
First Layer: .2mm
Perimeters: 4
Solid top layers: 15
Solid bottom layers: 10
Infill: 10% grid
No supports
Speed: 20mm/sec (15mm external perimeters)
NO ‘Z HOP’
.4mm Nozzle (Hatchbox PLA or eSUN PLA Pro recommended)
Temperature: 190˚
Layer height: .08mm (.05mm to .1mm will work as well)
First Layer: .2mm
Perimeters: 3
Solid top layers: 10
Solid bottom layers: 10
Infill: 10% grid
No supports
Speed: 20mm/sec (15mm external perimeters,)
NO ‘Z HOP’
